Maintenance and test

Model	No. appliances	BUS
TEV-200	200	EV-TAM
TEV-500	500	EV-TAM
TEV-1000	1000	EV-TAM

Projects
Request visit
Assoc. documents / BIM
Print / PDF technical data

Description:

Rectangular polycarbonate casing with status indicators and control buttons for the device on the front panel. Provided with serial ports that allow communication between the luminaries, the control unit and a computer. Designed to be installed on a symmetrical DIN 46277/3, EN 50022 rail of an electrical panel, taking up a width of 8 single magneto-thermal switches (141 mm). Testing and remote control equipment communicating via a two-wire BUS (BUS-TAM) with autonomous Daisalux TCA series luminaires. It is provided with an input for the fire alarm system. SBT-200 bus switches not needed. The installation is controlled by a local or remote computer. Functions: - Management of communication between the control computer and Daisatest system devices. Communication with the control computer can be performed using RS232 or ETHERNET connection. - Detects and reports main bus failures (short circuit and leakage) via indicator lights. - Management of functionality and autonomy testing, which must be made by self-contained luminaires, even when the PC is switched off or disconnected. - The port labelled AUX allows all of the light fittings connected to the Bus to be switched on, useful when connected to a central fire alarm system. Connection of MBAT 12-11 battery pack: - Operation is maintained in absence of power supply (independence of more than 1 hour). - Performs remote control functions: stand-by and restart. - There is a TEST-BUS button to facilitate set-up and checking of the bus.

Characteristics:

Format: TEV Control unit

No. of appliances commanded: 200

BUS: EV-TAM

Anchoring: Symmetrical DIN 46277/3 rail

Emergency lighting

Maintenance and test