TEV control units

Central battery and control systems

TEV-1000, TEV-500 and TEV-200 control units are the communication hub of the DaisaTest system between the luminaires and the control computer.

They communicate with the luminaires through the Bus cable, order the functional and duration tests and log the results, which will be transmitted from the TEV control unit to the control computer via RS232 or Ethernet.

Models

TEV-1000

TEV-1000

Testing and remote control equipment communicating via a two-wire BUS (BUS-TAM) with TEV-1000 self-contained Daisalux TCA series luminaires. 1.000 SBT-200 isolators must be installed.
The installation is controlled from a local or remote computer.

Luminaires to be controled: 1000

Technical data

TEV-500

Testing and remote control equipment communicating via a two-wire BUS (BUS-TAM) with TEV-500 self-contained Daisalux TCA serie luminaires. 500 SBT-200 isolators must be installed.
The installation is controlled from a local or remote computer.

Luminaires to be controled: 500

Technical data

TEV-200

Testing and remote control equipment communicating via a two wire BUS (BUS-TAM) with TEV-200 self-contained Daisalux TCA series luminaires. 200 Does not require SBT-200 isolators.
The installation is controlled from a local or remote computer.

Luminaires to be controled: 200

Technical data

Accesories for TEV Units

SBT-200

SBT-200

BUS isolator to connect a maximum of 200 luminaires.

With TCA Series luminaires, enables checking the status of secondary BUS lines used for communication with the control unit. The isolator optically couples the bus signal between the main and secondary lines, protecting the installation from possible errors and facilitating fault detection.

Technical data
SBT-200I

SBT-200I

Uninterrupted BUS isolator to connect a maximum of 200 luminaires. With TCA Series luminaires, enables checking the status of secondary BUS lines used for communication with the control unit. The isolator optically couples the bus signal between the main and secondary lines, protecting the installation from possible errors and facilitating fault detection. Duration greater than one hour.

Technical data
MBAT 12-11

MBAT 12-11

Battery module for the TEV-200, TEV-500 and TEV-1000 control units to interact with the installation in the absence of mains power.

Technical data

BUS-TAM 0,6/1 100 m

Conduit composed of two red-white 1.5 mm squared cross section wires. For the communication line between the TEV control unit and TCA devices. Length: 100 metres. 

(*) Estimated price: may vary depending on the price of the raw material.

Technical data

BUS-TAM 0,6/1 500 m

Conduit composed of two red-white 1.5 mm squared cross section wires. For the communication line between the TEV control unit and TCA devices. Length: 500 metres. 

(*) Estimated price: may vary depending on the price of the raw material.

Technical data

BUS-TAM 450/750 100 m

Cable composed(1) of two unipolar conductors with 450/750V white-red insulation twisted together, 1.5 mm2 section. For the communication line between TEV Control unit and TCA devices or for the communication of EV devices in centralized CB series equipment. Solution for installation in corrugated pipe. Length 100 meters.

Technical data

BUS-TAM 450/750 500 m

Cable composed(1) of two unipolar conductors with 450/750V white-red insulation twisted together, 1.5 mm2 section. For the communication line between TEV Control unit and TCA devices or for the communication of EV devices in centralized CB series equipment. Solution for installation in corrugated pipe. Length 500 meters.

Technical data